MCAL2000 - Concentric Cone Layout - CC2K

Tab 0 - Cone Data

[ Data ] [ Graphic ] [ Quote ] [ Utility ] [ About ] [ Downloads ]

 Images shown may not be the latest version or a version not yet released

  Help box display text for each input item on TAB-0 Data

Added Notes are shown as (Note: Text)

Dimensional values may be entered as fractions, they will be converted to decimal values

Input Calculation Mode

Four input modes are available

L.Dia, S.Dia and Frustum Height (default)

L.Dia, S.Dia and Peak Height

L.Dia, S.Dia and Peak Angle

L.Dia, S.Dia and Transition Length

Click image to select input mode

Input Fields

1. Large Diameter

Enter: Large Diameter Center Line

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

2. Small Diameter

(Note: Use NOT less than thickness)

Enter: Small Diameter Center Line

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

3. Frustum Height

(Note: Use NOT less than thickness)

Enter: Frustum Height Center Line

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

4. Peak Height

(Note: Only available when mode selected)

Enter: Peak Height Center Line

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

5. Peak Angle

(Note: Only available when mode selected)

Enter: Peak Angle Center Lines

Rollback: F5= Current, Ctl+F5= All

6. Transition Length

(Note: Only available when mode selected)

Enter: Transition Length Center Line

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

7. Number Of Segments

Enter: Number Of Segments Required

Rollback: F5= Current, Ctl+F5= All

8. Section Angle

Enter: Partial Cone Section Angle

Used For Replacing A Worn Section

For Example A Chute Liner

Rollback: F5= Current, Ctl+F5= All

9. Material Thickness

Enter: Material Thickness

This Is Only Used For Weight Calculations

Enter Gauge Sizes With A 'g' Suffix

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

10. Material Unit Weight   (Variant text)

(Note: If input Inches)

Enter: Material Unit Weight, lbs / Sq.Ft.

F8= 40.80 lbs / Sq.Ft. / 1"

Rollback: F5= Current, Ctl+F5= All

11. Lead In Distance

(Note: Set 0 for manual layout)

Enter: CNC Lead In Distance

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

12. Break Allowance

(Note: Cut off after forming)

Enter: Segment Break Allowance

This Is Added To The Segment Blank

And Included In The Blank Weight

F6= / 25.4, F7= x 25.4
Rollback: F5= Current, Ctl+F5= All

11. Segment Border

(Note: Set 0 for manual layout)

Enter: Segment Border

This Is Added To The Segment Blank

And Included In The Blank Weight

F6= / 25.4, F7= x 25.4

Rollback: F5= Current, Ctl+F5= All

Help Box text display text variants

Break Line Increment 

This is a mouse action, click on required value

Options 

Output Fractions

1/16" Fractional Rounding Selected

Rollback: F5= Current, Ctl+F5= All

Output Fractions

1/32" Fractional Rounding Selected

Rollback: F5= Current, Ctl+F5= All

Input Data Type

Inch Dimensioning Selected

CNC Output Has Been Changed To Inches

Rollback: F5= Current, Ctl+F5= All

Input Data Type

Metric Dimensioning Selected

CNC Output Has Been Changed To Metric

Rollback: F5= Current, Ctl+F5= All

10. Material Unit Weight

(Note: If input Metric)

Enter: Material Unit Weight, Kgs / Sq.M.

F8= 7.85 Kgs / Sq.M. / 1 mm

Rollback: F5= Current, Ctl+F5= All